Multipurpose (Mng) Console Cable Kit; Packing The 4036/2036 Switch; Figure 5: Fixed Rail (Kit-00008) - Mellanox Technologies Grid Director 4036 Installation Manual

Figure 5: Fixed Rail (KIT-00008)

2.4

Multipurpose (Mng) Console Cable Kit

The multipurpose console kit (Mng) contains:

RJ45 to RJ45 cable

A RJ45 to DB-9 cross-adaptor for RS-232 console connection (CLI). (The DB-9 adaptor
has a number 26 printed on it. This means that pins 2 and 6 are crossed).

A RJ45 to DB-9 adaptor for RS-232 console connection
2.5

Packing the 4036/2036 Switch

You may need to move the 4036/2036 switch to a different location or send it for repair;
should this be necessary, pack the equipment as described below.

To pack the 4036/2036 chassis
1. Unmount the 4036/2036 switch from the rack.
2. Dissassemble the rail brackets and pack the parts in the rail kit box.
3. Insert the 4036/2036 switch into its antistatic bag.
4. Carefully lift the switch, making sure that the bottom of the switch is facing down. Tip: you
can easily identify the bottom of the switch since it has a certification label.
5. Check the niches in the bottom foam to make sure that you are inserting the switch in the
correct direction as shown in the following figure. Note that the ID Tag is fragile and could
bend, use extra caution.
14
Unpacking