Figure 19: Power Cord Over The Long Bracket; Figure 20: Securing Power Cords; Figure 21: Connecting The Power Cables - Mellanox Technologies Grid Director 4036 Installation Manual

8. Place the power cords over the indentation of the long brackets.

Figure 19: Power cord over the long bracket

9. Secure each power cord with a cable tie wrap so that you can still adjust the length of the
cord if required.

Figure 20: Securing power cords

10. Connect the power cords to the switch power supplies (PSU).

Figure 21: Connecting the power cables

11. Push the switch inwards (from the front side of rack) until the long bracket comes together
with the rail.
38
Hardware Installation