GENERATOR AND STARTER CLUTCH
5 - 76
EAS00347
REMOVING THE GENERATOR
1. Remove:
• generator cover 1
NOTE:
_
Loosen each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern. After all of
the bolts are fully loosened, remove them.
2. Remove:
• generator rotor bolt 1
• washer
NOTE:
_
While holding the generator rotor 2 with the
primary sheave holder 3, loosen the genera-
tor rotor bolt.
Primary sheave holder
YS-01880-A
3. Remove:
• generator rotor 1
(with the alternator rotor puller 2)
Alternator rotor puller
YM-01080-A
EAS00348
CHECKING THE STARTER CLUTCH
1. Check:
• starter clutch idle gears 1
• starter clutch gear 2
Burrs/chips/roughness/wear → Replace the
defective part(s).
ENG