Yamaha XV1700PCRC Service Manual page 281

2
a
1
HANDLEBAR
3. Install:
• handlebar 1
• upper handlebar holders 2
CAUTION:
_
• First, tighten the bolts on the front side of
the handlebar holder, and then on the rear
side.
• Turn the handlebar all the way to the left
and right. If there is any contact with the
fuel tank, adjust the handlebar position.
NOTE:
_
Align the match marks a on the handlebar
with the upper surface of the lower handlebar
holder.
4. Tighten:
• lower handlebar holder nuts
5. Install:
• clutch lever holder
NOTE:
_
Align the slit of clutch lever holder with the
punch mark a on the handlebar.
6. Install:
• clutch cable
NOTE:
_
Lubricate the end of the clutch cable with a thin
coat of lithium soap base grease.
4 - 72
CHAS
28 Nm (2.8 m • kg, 20 ft • lb)
40 Nm (4.0 m • kg, 29 ft • lb)