Yamaha XV1700PCRC Service Manual page 273

FRONT FORK
7. Install:
• dust seal 1
(with the fork seal driver 2)
8. Install:
• rod puller 1
(onto the damper rod 2)
Rod puller
YM-01437
9. Fully compress the front fork leg.
10.Fill:
• front fork leg
(with the specified amount of the recom-
mended fork oil)
Quantity (each front fork leg)
476 cm
Recommended oil
Yamaha suspension oil "01"
CAUTION:
_
• Be sure to use the recommended fork oil.
Other oils may have an adverse effect on
front fork performance.
• When disassembling and assembling the
front fork leg, do not allow any foreign
material to enter the front fork.
11.After filling the front fork leg, slowly stroke
the damper rod 1 up and down (at least ten
times) to distribute the fork oil.
NOTE:
_
Be sure to stroke the damper rod slowly
because the fork oil may spurt out.
4 - 64
CHAS
3
(16.8 Imp qt, 16.1 US qt)