Removing The Middle Driven Shaft - Yamaha XV1700PCRC Service Manual

TRANSFER GEAR CASE

REMOVING THE MIDDLE DRIVEN SHAFT

NOTE:
_
Loosen the middle drive gear nut before
remove the drive sprocket.
1. Straighten the lock washer tab.
2. Loosen:
• middle drive gear nut 1
NOTE:
_
When loosening the middle drive gear nut,
press down on the brake pedal so the middle
drive gear does not move.
3. Remove:
• primary chain 1
• middle drive gear 2
• middle driven shaft 3
NOTE:
Remove the primary chain, middle drive gear
and middle driven shaft at the same time.
CHECKING THE MIDDLE DRIVE
1. Check:
• middle drive gear 1
• middle driven gear 2
Damage/wear → Replace the middle drive
gear, middle driven shaft and primary chain
as a set.
2. Check:
• primary chain 1
Damage/stiffness → Replace the primary
chain, middle drive gear and middle driven
shaft as a set.
5 - 88
ENG