CHECKING THE TRANSFER GEAR OIL LEVEL/
CHANGING THE TRANSFER GEAR OIL
2
4. Check:
• transfer gear oil level
The transfer gear oil level should be up to
the brim 2 of the hole.
Below the brim → Add the recommended
transfer gear oil to the proper level.
Recommended oil
SAE80API "GL-4" Hypoid gear
oil
CAUTION:
Do not allow foreign materials to enter the
transfer case.
5. Install:
• checking bolt
6. Install:
• front exhaust pipe
• rear exhaust pipe
• muffler
Refer to "ENGINE" in chapter 5.
CHANGING THE TRANSFER GEAR OIL
1. Remove:
• muffler
• rear exhaust pipe
• front exhaust pipe
Refer to "ENGINE" in chapter 5.
2. Place a container under the transfer gear oil
drain bolt.
3. Remove:
• straight plug 1
• transfer gear oil drain bolt 2
4. Drain:
• transfer gear oil
(completely from the transfer gear case)
5. Check:
• transfer gear oil drain bolt gasket
Damage → Replace.
3 - 33
CHK
ADJ
8 Nm (0.8 m • kg, 5.8 ft • lb)