Yamaha XV1700PCRC Service Manual page 332

CAMSHAFTS
4. Install:
• front cylinder camshaft end cover 1
NOTE:
_
• Align the projection a on the front cylinder
camshaft end cover with the hole b on the
front cylinder camshaft.
• Finger tighten the place bolts.
5. Install:
• straight keys
• camshaft drive gear 1
• camshaft driven gear 2
NOTE:
_
• Cover the crankcase hole with a clean rag 3
to prevent the straight keys from falling into
the crankcase.
• Align the punch mark a on the camshaft
drive gear 1 with the punch mark b on the
camshaft driven gear 2.
• Insert a cross-headed screwdriver into one of
the holes in the outer camshaft driven gear
and rotate the gear until the teeth of both
driven gears are aligned. The teeth of both
camshaft driven gears must be aligned for
installation.
5 - 32
ENG