Checking The Rear Wheel Drive Hub; Checking And Replacing The Rear Wheel Pulley; Assembling The Rear Wheel - Yamaha XV1700PCRC Service Manual

REAR WHEEL, BRAKE DISC, AND REAR WHEEL
PULLEY
EAS00567

CHECKING THE REAR WHEEL DRIVE HUB

1. Check:
• rear wheel drive hub 1
Cracks/damage → Replace.
• rear wheel drive hub dampers 2
Damage/wear → Replace.
EAS00568
CHECKING AND REPLACING THE REAR
WHEEL PULLEY
1. Check:
• rear wheel pulley
Surface plating has come → Replace the
rear wheel pulley.
Bent teeth → Replace the rear wheel pul-
ley.
2. Replace:
• rear wheel pulley
M MMM M MMM M M MMM M
a. Remove the self-locking nuts and the rear
wheel pulley.
b. Clean the rear wheel drive hub with a clean
cloth, especially the surfaces that contact
the pulley.
c. Install the new rear wheel pulley.
Rear wheel pulley self-locking nut
95 Nm (9.5 m • kg, 68 ft • lb)
NOTE:
_
Tighten the self-locking nuts in stages and in a
crisscross pattern.
L LLL L LLL L L LLL L

ASSEMBLING THE REAR WHEEL

1. Install:
• bearings
• spacer
• bearing
• oil seal
New
Refer to "FRONT WHEEL AND BRAKE
DISCS".
4 - 18
CHAS
M MMM M M MMM M M MMM M MMM
L LLL L L LLL L L LLL L LLL