Installing The Transfer Gear Case - Yamaha XV1700PCRC Service Manual

TRANSFER GEAR CASE

INSTALLING THE TRANSFER GEAR CASE

1. Install:
• middle driven shaft 1
• middle drive gear 2
• primary chain 3
(into the transfer gear case)
• drive pulley nut 4
NOTE:
_
• Install the middle driven shaft, middle drive
gear and primary chain at the same time.
• Align the splines on the middle gear with the
splines on the drive axle.
• Temporarily install the drive pulley nut onto
the middle driven shaft.
2. Install:
• oil strainer 1
• dowel pins 2
• transfer gear case cover gasket 3
3. Install:
• transfer gear case cover 1
• nut 2
4. Install:
• conical spring washer 1
• middle drive gear nut 2
NOTE:
• Lubricate the middle driven gear nut threads
and conical spring washer mating surfaces
with engine oil.
• Install the washer 1 with the "OUT" mark a
facing out.
– 43 –
ENG
New
10 Nm (1.0 m · kg, 7.2 ft · lb)
30 Nm (3.0 m · kg, 22 ft · lb)
New