È
É
CRANKCASE
4. Install:
• holder
• crankcase bolts
NOTE:
_
• Lubricate the bolt threads with engine oil.
• Tighten each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern.
• Tighten the bolts in numerical order (refer to
the numbers in the illustration).
È Left crankcase
É Right crankcase
M8 × 100 mm bolts: 1, 2
M8 × 80 mm bolt: 3
M6 × 105 mm bolt: K
M6 × 85 mm bolts: 9, C
M6 × 75 mm bolts: D, E
M6 × 60 mm bolts: 4 ~ 7
M6 × 40 mm bolts: 8, 0 ~ B, F ~ J
Bolt 1 ~ 3
24 Nm (2.4 m • kg, 17 ft • lb)
Bolt 4 ~ K
10 Nm (1.0 m • kg, 7.2 ft • lb)
5. Apply:
• engine oil
(onto the crankshaft pins bearings and oil
delivery holes)
6. Check:
• crankshaft and transmission operation
Rough movement → Repair.
7. Install:
• engine oil pump driven gear 1
• engine oil pump driven gear stopper 2
• oil delivery pipe 3
• bolts 4
8. Install:
• generator rotor
Refer to "GENERATOR AND STARTER
CLUTCH".
5 - 100
ENG
10 Nm (1.0 m • kg, 7.2 ft • lb)