Special Tools - Yamaha XV1700PCRC Service Manual

EAS00027

SPECIAL TOOLS

The following special tools are necessary for complete and accurate tune-up and assembly. Use
only the appropriate special tools as this will help prevent damage caused by the use of inappropri-
ate tools or improvised techniques. Special tools, part numbers or both may differ depending on the
country.
When placing an order, refer to the list provided below to avoid any mistakes.
Tool No.
YB-35956
YM-01080-A
YM-01423
YM-01434
Rod puller
YM-01437
YM-01441
YM-01442
Tool name/Function
Mity vac
This tool used to measure the vacuum
pressure.
Alternator rotor puller
This tool is used to remove the genera-
tor rotor.
Damper rod holder
This tool is used to hold the damper rod
assembly when loosening or tightening
the damper rod assembly bolt.
Rod holder
This tool is used to support the damper
adjusting rod.
Rod puller
These tools are used to pull up the front
fork damper rod.
Fork spring compressor
This tool is used to disassemble or
assemble the front fork legs.
Fork seal driver
This tool is used to install the front fork's
oil seal and dust seal.
1 - 35
SPECIAL TOOLS
Illustration
GEN
INFO