CLUTCH
2. Measure:
• clutch plate warpage
(with a surface plate and thickness gauge
1)
Out of specification → Replace the clutch
plates as a set.
Clutch plate warpage limit
0.2 mm (0.008 in)
EAS00283
CHECKING THE CLUTCH PLATE SPRING
1. Check:
• clutch plate spring 1
Damage → Replace.
2. Check:
• clutch plate spring seat 2
Damage → Replace.
EAS00284
CHECKING THE CLUTCH HOUSING
1. Check:
• clutch housing dogs
Damage/pitting/wear → Deburr the clutch
housing dogs or replace the clutch housing.
NOTE:
_
Pitting on the clutch housing dogs will cause
erratic clutch operation.
2. Check:
• bearing
Damage/wear → Replace the bearing and
clutch housing.
EAS00285
CHECKING THE CLUTCH BOSS
1. Check:
• clutch boss splines
Damage/pitting/wear → Replace the clutch
boss.
NOTE:
_
Pitting on the clutch boss splines will cause
erratic clutch operation.
5 - 63
ENG