Isuzu Trooper 1999 Workshop Manual page 252

4A1–24 DIFFERENTIAL (FRONT)
Thickness of thrust washers available:
1.00 mm, 1.05 mm, 1.10 mm (0.039 in, 0.041 in,
0.043 in)
5. Install lock pin. After lock pin installation, stake the
cage to secure the lock pin.
Legend
(1) Staked Portion
(2) Lock Pin
6. Clean the ring gear threaded holes to remove the
locking agent. When installing the ring gear, apply
LOCTITE 271 or equivalent to all the threaded area
and half of the unthreaded area of the bolt.
7. Tighten the bolts in diagonal sequence as illustrated.
Torque: 108 N·m (80 lb ft)
NOTE: Discard used bolts and install new ones.
425RS050
425RS051
415RS016