Disassembly - Isuzu Trooper 1999 Workshop Manual

4C–12
DRIVE SHAFT SYSTEM

Disassembly

NOTE: For the left side, follow the same steps as right
side.
1. Raise the hooked end of the band (1) with a
screwdriver or equivalent.
2. Remove band.
3. Pry off circlip (1) with a screwdriver or equivalent.
4. Remove drive shaft joint assembly.
5. Using snap ring pliers, remove the snap ring.
6. Remove spacer.
7. Remove the six balls (1) with a screwdriver or
equivalent.
412RS009
412RS010
412RS011
412RS012