Rear Disc Brake Caliper Assembly And Associated Parts; Removal - Isuzu Trooper 1999 Workshop Manual

Rear Disc Brake Caliper Assembly and Associated Parts

Legend
(1) Brake Flexible Hose
(2) Clip
(3) Lock Bolt

Removal

1. Raise the vehicle and support with suitable safety
stands.
2. Remove wheel and tire assembly, refer to "Wheels
and Tires System" in Section 3E.
3. Remove the bolt and gaskets, then disconnect the
flexible hose from the caliper and after disconnecting
the flexible hose (1), cap or tape the openings to
prevent entry of foreign material.
Rear Disc Brake Caliper Assembly
306RW008
POWER ASSISTED BRAKE SYSTEM
(4) Support Bracket
(5) Guide Bolt
(6) Pad Assembly with Shim
(7) Caliper Assembly
4. Since the brake fluid flows out from the connecting
coupler, place a drain pan under the vehicle.
5. Remove lock bolt (2).
6. Remove guide bolt (3).
7. Remove caliper assembly.
8. Remove support bracket with pad assembly and take
care not to damage the flexible brake hose when
removing the support bracket.
9. Remove pad assembly (with shim) and mark the
lining locations if they are to be reinstalled.
5C–49
306RW007
306RW009