Installation
To install, follow the removal steps in the reverse order,
noting the following point:
1. Adjust the control lever assembly cables.
f Refer to Control Lever Assembly in this section.
Disassembled View
Legend
(1) Upper Case
(2) Mode Door
(3) Lower Case
Removal
1. Disconnect the battery ground cable.
HEATING, VENTILATION AND AIR CONDITIONING (HVAC) 1A–21
Blower Link Unit and / or Mode door
(4) Sub Lever
(5) Door Lever
(6) Blower Assembly
2. Discharge
and
recover
conditioning).
f Refer to Refrigerant Recovery in this section.
3. Remove blower assembly.
f Refer to Blower Assembly in this section.
873RS001
refrigerant
(with
air