Isuzu Trooper 1999 Workshop Manual page 500

7. Mount the coil assembly and tighten the set nuts with
the specified torque.
Torque : 10 N·m (87 lb in)
8. Plug the terminal in the central connector.
NOTE: Pay attention not to damage other terminals.
9. Install speed gear and tone wheel.
10. Mount the ball bearing (2) flat as shown in the figure.
11. Using snap ring pliers, attach the snap ring to the
transfer cover assembly.
NOTE: Securely mount the snap ring to the groove of the
transfer cover assembly.
261RW009
TRANSFER CASE (TOD)
4D2–15