Isuzu Trooper 1999 Workshop Manual page 470

4D1–20 TRANSFER CASE (STANDARD TYPE)
11. Remove bearing collar.
12. Remove ball.
13. Remove plate.
14. Remove ball bearing, use a bench press and the ball
bearing remover J–22912–01 to remove the ball
bearing.
15. Remove input shaft.
16. Remove bearing snap ring.
17. Remove front output gear assembly, use a pair of
snap ring pliers to expand the bearing snap ring and
use a plastic hammer to tap the front output gear
assembly free.
226RS071
18. Remove bearing snap ring.
19. Remove ball bearing.
20. Remove bearing collar.
21. Remove sub–gear snap ring. (M/T)
22. Remove spacer. (M/T)
23. Remove belleville spring. (M/T)
24. Remove sub–gear (anti–lash plate). (M/T)
25. Remove front output gear.
26. Remove needle bearing, use a bench press and the
bearing remover J–22912–01 to remove the parts
above.
265RS002
27. Remove inside ring.
28. Remove outside ring.
29. Remove block ring.
262RS009
262RS010