Isuzu Trooper 1999 Workshop Manual page 460

4D1–10 TRANSFER CASE (STANDARD TYPE)
15. Stake the front companion flange nut at one spot.
NOTE: Be sure to confirm that there is no crack at the
staked portion of the flange nut after staking.
16. Install the O–ring (8) to the speedometer driven gear
bushing (7).
17. Install the driven gear to the speedometer driven gear
bushing (7).
18. Install the speedometer driven gear assembly to the
transfer rear cover.
19. Install the plate (6) to the transfer rear case and
tighten to the specified torque.
Torque: 15 N·m (11 lb ft)
20. Install the speedometer sensor and tighten to the
specified torque.
Torque: 27 N·m (20 lb ft)
266RW002
225RW005