General Description; Rear Propeller Shaft And Associated Parts 4C-36; Removal - Isuzu Trooper 1999 Workshop Manual

4C–36
DRIVE SHAFT SYSTEM

General Description

Since the propeller shaft is balanced carefully, welding or
any other modifications are not permitted.
Rear Propeller Shaft and Associated Parts
Legend
(1) Bolt, Nut and Washer

Removal

1. Jack up the vehicle and support it on the chassis
stands.
Rear Propeller Shaft
Alignment marks should be applied to each propeller
shaft before removal.
(2) Rear Propeller Shaft
(3) Bolt, Nut and Washer
2. Gear shift lever should be placed in neutral position
and parking brake released.
NOTE: Apply alignment marks on the flange at the rear
propeller shaft both front and rear side.
401RW003
401RW059