CAUTION: Be careful not to break the ball joint boot.
7. Remove upper ball joint.
8. Remove bolt and plate.
9. Remove nut assembly.
10. Remove camber shims and note the positions and
number of shims.
11. Remove caster shims and note the positions and
number of shims.
12. Remove upper control arm assembly.
13. Remove nut.
14. Remove plate.
15. Remove bushing by using remover J–29755.
16. Remove fulcrum pin.
901RW043
Inspection and Repair
Make necessary parts replacement if wear, damage,
corrosion or any other abnormal conditions are found
through inspection.
Check the following parts:
f Upper control arm
f Bushing
f Fulcrum pin
901RW047
FRONT SUSPENSION
3C 15
901RW048