Combination Switch; Combination Switch And Associated Parts; Removal - Isuzu Trooper 1999 Workshop Manual

2A–50 POWER ASSISTED SYSTEM

Combination Switch and Associated Parts

Legend
(1) Steering Column Cover
(2) Steering Wheel
(3) Inflator Module

Removal

1. Turn the steering wheel so that the vehicle's wheels
are pointing straight ahead.
2. Turn the ignition switch to "LOCK".
3. Disconnect the battery "–" terminal cable, and wait at
least 5 minutes.
4. Disconnect the yellow 2-way SRS connector located
under the steering column.

Combination Switch

(4) Combination Switch and SRS Coil Assembly
(5) Front Console Assembly
(6) Steering Lower Cover
(7) Lower Cluster Assembly
CAUTION: The wheels of the vehicle must be
straight ahead and the steering column in the
"LOCK" position before disconnecting the steering
wheel. Failure to do so will cause the coil assembly
to become uncentered which will cause damage to
the coil assembly.
5. Remove the transmission (for M/T) and transfer
control lever knob. Disconnect the wiring harness
connectors then remove front console assembly.
6. Remove lower cluster assembly.
7. Remove the engine hood opening lever, then remove
steering lower cover.
431RW001