Chapter 12. Administration - Setup Tab - IBM System Storage DS3500 Introduction And Implementation Manual

Draft Document for Review March 28, 2011 12:24 pm
Administration - Setup tab
Chapter 12.
In this chapter, we describe the Setup tab of the DS Storage Manager. This tab can be used
for initial configuration of a new DS3500 Storage Subsystem. The Setup tab contains links to
tasks that you can perform when setting up a storage subsystem such as setting the storage
subsystem name and password, configure the Ethernet management ports, enable the
premium features, configure the iSCSI settings, configuring capacities on the storage
subsystem, and others. You can click a link to open the corresponding dialog or wizard.
We cover the following tasks:
12.2, "Locate Storage Subsystem" on page 306
12.3, "Rename Storage Subsystem" on page 307
12.4, "Set a Storage Subsystem Password" on page 307
12.5, "Configure iSCSI Host Ports" on page 308
12.6, "Configure Storage Subsystem" on page 309
12.7, "Map Logical Drives" on page 314
12.8, "Save Configuration" on page 314
12.9, "Manually Define Hosts" on page 315
12.10, "Configure Ethernet Management Ports" on page 316
12.11, "View/Enable Premium Features" on page 316
12.12, "Manage iSCSI Settings" on page 316
If you successfully provide all these base configurations which are referenced in this chapter,
you can be almost sure that your subsystem is properly configured.
All the links navigate you to provide configuration, that is mentioned in the link. The same
tasks can be done also from other menu in DS Storage Manager. We will describe all the
tasks and provide you with appropriate links more information about a particular task as
necessary.
© Copyright IBM Corp. 2010. All rights reserved.
7914Admin_Setup.fm
12
305