IBM System Storage DS3500 Introduction And Implementation Manual page 352

7914Admin_iSCSI.fm
Figure 13-10 Advanced IPv4 Settings
7. Similar configurations are available for the IPv6 settings.
8. After configuring IPv4 and /or IPv6, you can select Advanced Host Port Settings (as
shown in Figure 13-11). These settings apply to both the IPv4 and IPv6 settings. The TCP
listening port for iSCSI and jumbo frame support can be configured here. To use a TCP
port other than default 3260, select the check-box Use custom listening port and specify
the port. A custom port can be between port 49152 and 65535.
Figure 13-11 Advanced iSCSI Host Port Settings
Specify the jumbo frame size after enabling jumbo frames support in the Advanced Host
Port Settings. The default frame size is 1500 bytes per frame. The MTU can be defined
between 1501 and 9000 bytes per frame.
9. Configure the remaining iSCSI host ports in the iSCSI host port drop-down menu
(Figure 13-9 on page 327) in the same way.
10.In bottom part of the Configure iSCSI Host Ports window (Figure 13-8 on page 326), you
have the option to disable ping (ICMP echo) requests for all iSCSI host ports. A reset of all
ports is required to apply this setting.
328
IBM System Storage DS3500: Introduction and Implementation Guide
Draft Document for Review March 28, 2011 12:24 pm