IBM System Storage DS3500 Introduction And Implementation Manual page 585

Draft Document for Review March 28, 2011 12:24 pm
Figure 18-9 SAS Connectivity Module - Update Firmware
3. In the Firmware File field, enter the new firmware file name, or click Browse and locate the
firmware file.
4. Click Install to install the new file. A firmware update progress window opens, as shown in
Figure 18-10.
Figure 18-10 SAS Connectivity Module - Installation confirmation
5. Click OK or Cancel. If the installation of the new firmware file is successful, an installation
confirmation window opens, as shown in Figure 18-11 on page 562. If there are errors
during the installation, an error message window opens.
SAS configuration guide for Windows on IBM
Chapter 18. Windows SAS configuration guide for IBM BladeCenter
561