Unlock Drives - IBM System Storage DS3500 Introduction And Implementation Manual

7914FDE.fm

15.6.1 Unlock drives

Prior to importing the array, all drives must be unlocked. This procedure is performed on one
disk, but will then be applied to all disks.The examples are taken on a different machine.
From the Physical tab in the Storage Manager window, select one of the FDE drives that has
just been installed (it will be marked as offline). Right-click the drive and select Unlock, as
shown in Figure 15-33.
Figure 15-33 Select the Unlock option on the FDE drive
The DS3500 storage subsystem will recognize the FDE drives that are locked and will prompt
for the key file and pass phrase, as shown in Figure 15-34.
Figure 15-34 FDE drives locked with the key file and pass phrase to unlock
478
IBM System Storage DS3500: Introduction and Implementation Guide
Draft Document for Review March 28, 2011 12:24 pm