Managing Alerts - IBM System Storage DS3500 Introduction And Implementation Manual

Draft Document for Review March 28, 2011 12:24 pm
Similar to Remote Access, you can also modify the Service Access Timeout. To set the
Service Access Timeout, go to the Manage Service Access section in the Internal Firewall
and Service Access window, select the desired Service Access Timeout value, and click
Update Timeout Value, as shown in Figure 16-33 on page 528.
IBM System Storage DS security
The Storage Manager has the ability to require an administrative password in order to make
changes to the subsystem configuration. We suggest configuring this password.
The IBM System Storage DS subsystems also have a controller shell environment that is
accessible using a remote login (RLOGIN) client. Storage Manager has an option to disable
RLOGIN, and we normally suggest disabling RLOGIN.

16.2.7 Managing alerts

To mange alerts, perform these steps:
1. When RSM receives SNMP alerts from one of the defined storage subsystems, an
attention mark (!) is shown next to the reporting link, as shown in Figure 16-34. Click
Reporting to see the alerts.
Figure 16-34 Main Menu: Storage Problem
2. The reporting and alert window shows all those subsystems that have sent alerts sent to
RSM (Figure 16-35 on page 530). Click View or Close Alerts.
Chapter 16. IBM Remote Support Manager for Storage
7914RSM.fm
529