IBM System Storage DS3500 Introduction And Implementation Manual page 195

Draft Document for Review March 28, 2011 12:24 pm
E-mail alerts
Here we discuss how to work with e-mail alerts:
1. To send e-mail alerts, you have to first define an SMTP server. Enter the name or IP
address of your mail server and the sender e-mail address, as shown in Figure 2.
Figure 6-12 Configure Alerts - define mailserver
2. Select the Email tab to configure the e-mail address to which the alerts are sent. Enter the
e-mail addresses and click Add as shown in Figure 6-13 on page 172.
7914Admin_Enterprise1108.fm
Chapter 6. Administration - Enterprise Management
171