IBM System Storage DS3500 Introduction And Implementation Manual page 312

7914Admin_Mappings.fm
Figure 11-7 Define Host: Specify Host type
6. In the next step, you are asked whether the host is a part of a cluster (Figure 11-8).
Choose Yes if it will be clustered, or No, if it will be a standalone server. Select Next to
continue.
Figure 11-8 Define Host: Specify sharing (clustering)
7. If the answer is Yes, then you need to specify a host group. The host group can be either a
new or an existing one. If you select an existing host group, already associated hosts are
displayed in the right pane of this window. If you enter a new name, as shown in
Figure 11-9 on page 289, the new host group will be created, with this new host as a
member. Select Next to continue.
288
IBM System Storage DS3500: Introduction and Implementation Guide
Draft Document for Review March 28, 2011 12:24 pm