IBM System Storage DS3500 Introduction And Implementation Manual page 598

Microsoft Cluster configuration with DS3500.fm
Figure 19-2 Define Host Group
4. Select the Mapping tab, select Define from Mapping menu and select Host as shown in
Figure 19-3 on page 575. Specify the host name and the host interface type. Add the host
port identifiers and select the appropriate host type. In our example, we defined
Node1-Blade5 and Node2-Blade6 as our two cluster nodes.
574
IBM System Storage DS3500: Introduction and Implementation Guide
Draft Document for Review March 28, 2011 12:24 pm