Table of Contents
Advertisement
Chapter 10 DHCP Server
Table 38 Network > DHCP Server > Advanced
LABEL
First DNS Server
Second DNS
Server
Third DNS Server
Apply
Cancel
10.5 Client List Screen
Click Network > DHCP Server > Client List. Read-only information here relates
to your DHCP status. The DHCP table shows current DHCP client information
(including IP Address, Host Name and MAC Address) of all network clients
using the NVG2053's DHCP server.
Figure 56 Network > DHCP Server > Client List
The following table describes the labels in this screen.
Table 39 Network > DHCP Server > Client List
LABEL
#
Status
Host Name
IP Address
128
DESCRIPTION
Select From ISP if your ISP dynamically assigns DNS server
information (and the NVG2053's WAN IP address).
Select User-Defined if you have the IP address of a DNS server.
Enter the DNS server's IP address in the field to the right.
Select DNS Relay to have the NVG2053 act as a DNS proxy. The
NVG2053's LAN IP address displays in the field to the right (read-
only). The NVG2053 tells the DHCP clients on the LAN that the
NVG2053 itself is the DNS server. When a computer on the LAN sends
a DNS query to the NVG2053, the NVG2053 forwards the query to the
NVG2053's system DNS server (configured in the Network >
Broadband screen) and relays the response back to the computer.
Select None if you do not want to configure DNS servers. If you do
not configure a DNS server, you must know the IP address of a
computer in order to access it.
Click Apply to save your changes back to the NVG2053.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
This is the index number of the host computer.
This displays whether the client is connected to the NVG2053.
This indicates the computer host name.
This indicates the IP address assigned to this client computer.
NVG2053 User's Guide
Advertisement
Table of Contents
