Table of Contents
Advertisement
Chapter 4 Tutorials
4.8.2 Configuring DDNS on Your WiMAX Device
Configure the following settings in the Network Setting > DDNS screen.
Select Enable Dynamic DNS.
1
Select dyndns.org for the
2
service provider.
Select Dynamic for the
3
service type.
Type mywimax.dyndns.org
4
in the Domain Name field.
Enter the user name
5
(UserName1) and password
(12345).
Select WAN IP for the IP update policy.
6
Click Save.
7
4.8.3 Testing the DDNS Setting
Now you should be able to access the WiMAX Device from the Internet. To test
this:
Open a web browser on the computer (using the IP address a.b.c.d) that is
1
connected to the Internet.
Type http://mywimax.dyndns.org and press [Enter].
2
The WiMAX Device's login page should appear. You can then log into the WiMAX
3
Device and manage it.
4.9 Configuring Static Route for Routing to
Another Network
In order to extend your Intranet and control traffic flowing directions, you may
connect a router to the WiMAX Device's LAN. The router may be used to separate
two department networks. This tutorial shows how to configure a static routing
rule for two network routings.
46
MAX208M User's Guide
Advertisement
Table of Contents
