Wps Station Screen; Scheduling Screen - ZyXEL Communications LTE3301 Series User Manual

7.9 WPS Station Screen

Use this screen when you want to add a wireless station using WPS. To open this screen, click
Network > Wireless LAN > WPS Station tab.
Note: After you click Push Button on this screen, you have to press a similar button in
the wireless station utility within 2 minutes. To add the second wireless station, you
have to press these buttons on both device and the wireless station again after the
first 2 minutes.
Figure 45 Network > Wireless LAN > WPS Station
The following table describes the labels in this screen.
Table 29 Network > Wireless LAN > WPS Station
LABEL
Push Button
Or input station's
PIN number

7.10 Scheduling Screen

Use this screen to set the times your wireless LAN is turned on and off. Wireless LAN scheduling is
disabled by default. The wireless LAN can be scheduled to turn on or off on certain days and at
certain times. To open this screen, click Network > Wireless LAN > Scheduling tab.
Chapter 7 Wireless LAN
DESCRIPTION
Use this button when you use the PBC (Push Button Configuration) method to configure
wireless station's wireless settings.
Click this to start WPS-aware wireless station scanning and the wireless security
information synchronization.
Use this button when you use the PIN Configuration method to configure wireless
station's wireless settings.
Type the same PIN number generated in the wireless station's utility. Then click Start to
associate to each other and perform the wireless security information synchronization.
LTE3301 Series User's Guide
78