Removing And Installing The Panel - Yamaha FJ-09 2014 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Removing and installing the
panel
The panel shown needs to be removed
to perform some of the maintenance
jobs described in this chapter. Refer to
this section each time the panel needs
to be removed and installed.
7
1. Panel A
Panel A
To remove the panel
1. Remove the
screws, and then pull the panel off
as shown.
EAU18752
1
1. Quick fastener screw
1
EAU63100
1. Panel A
2. Quick fastener screw
2. Disconnect the turn signal light
lead coupler.
quick fastener
2
1
7-9
1. Turn signal light lead coupler
To install the panel
1. Connect the turn signal light lead
coupler.
2. Place the panel in the original po-
sition, and then install the quick
fastener screws.
1