System Configuration - Furuno SFD-1010 Operator's Manual

SYSTEM CONFIGURATION

○ Connectable equipment
*: One unit of radar sensor, fish finder sensor and multi beam sonar can be connected at the same
time.
*: Two units of SFD-1010/1012 can be connected to the same network as the maximum.
Note: When the DFF-3D is connected, turn on the power of DFF-3D, then turn on the power of
SFD-1010/1012.
○ Configuration with one display unit
OR
Either radar or fish finder can be used by changing the sensor selection in the

[CONNECTING EQUIPMENT SETTING] menu.
The [CONNECTING EQUIPMENT SETTING] menu appears if the SFD is activated

prior to the setup of connecting equipment.
If the [CONNECTING EQUIPMENT SETTING] menu is executed, the [CONNECTING

EQUIPMENT SETTING] menu appears when an application is restarted.
xiii