Remote Management Info; Statistics; Table 4.12. Remote Management Info Menu; Table 4.13. Statistics Menu Items - Tandberg Data StorageLoader Installation And User Manual

4.5.3. Remote Management Info

The Remote Management Interface (RMI) settings info is listed in Table 4.12. This menu tree is the
place to find the currently allocated dynamic IP address, default gateway and network mask when
running in DHCP mode. The MAC address of the Loader is also shown here.
Item name
IP address mode
Static IP address
Static netmask
Static gateway
Dynamic IP address
Dynamic netmask
Dynamic gateway
MAC-address

Table 4.12. Remote Management Info Menu.

4.5.4. Statistics

Item name
Fetch Statistics
Stow Statistics
Power On Time
Time since clean

Table 4.13. Statistics Menu Items.

38
Legal values
Static mode, DHCP mode
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
Value is fixed
Description
When selected, the operator can scroll through the fetch count and fetch
retries for the drive and all magazine slots.
When selected, the operator can scroll through the stow count and stow
retries for the drive and all magazine slots.
Displays Power On Hours for the loader
If available from the drive, this entry displays number of hours since the
drive was last cleaned.
Default value
DHCP mode
0.0.0.0
0.0.0.0
0.0.0.0
Not applicable
Not applicable
Not applicable
Value is fixed
Chapter 4. Operation and Configuration.