Settings Pages; Figure 5.4. Remote Management Settings Pages - Tandberg Data StorageLoader Installation And User Manual

5.2.4. Settings Pages

On the setting pages, you can change the StorageLoader configuration. These pages can only be
accessed by someone who is logged in as Administrator. One of the Setting Pages is illustrated in
Figure 5.4 below.

Figure 5.4. Remote Management Settings Pages.

Personalization
On this page you can change the Remote Management passwords. To secure your system, change
both the passwords the first time you use the system. It is possible to clear the remote management
passwords via the front panel, please see Chapter 4.6.1. The Maintenance Menus.
Here you may also turn on email event notification. When event notification is enabled, the
StorageLoader will send warnings and errors by email to the recipient's e-mail address.
Network
On this page it is possible to change the IP configuration. See details in Chapter 4.4.3. Remote
Management setup. The new configuration will take effect at next system reset.
Please verify that the chosen settings are correct and consistent before resetting
Note
the loader. Any mistakes will have to be corrected via the front panel.
51 StorageLoader Installation and User Manual