Maintenance; Figure 5.5. Remote Management Maintenance Pages - Tandberg Data StorageLoader Installation And User Manual

5.2.6. Maintenance Pages
On these pages it is possible to select predefined tests and actions in order to check and improve the
reliability of the StorageLoader. See Figure 5.5 below.

Figure 5.5. Remote Management Maintenance Pages.

Diagnostics
•
Clean the drive by importing a cleaning cartridge.
•
If you choose Identify loader, the front panel display light will toggle on and off for 15 seconds.
This makes it easy to verify that you are connected to the correct loader if several loaders are
stacked.
•
Test robotics by moving cartridges.
•
Test robotics without moving cartridges.
Debugging
•
Memory dump will download a snapshot of the system memory of the loader or of the tape
drive to a file that can be sent to Tandberg Data's service for diagnostic purposes.
•
Perform a system reset.
•
Media log displays a log of all cartridge movements and a map of the current cartridge
locations.
Firmware Upgrade
•
Perform upgrade on the StorageLoader firmware. See Chapter 7. Updating Firmware.
53 StorageLoader Installation and User Manual