Figure 4.15. Magazine Eject; Figure 4.16. Removing The Magazine From The Loader - Tandberg Data StorageLoader Installation And User Manual

Scroll to select left, right or both magazine(s) using the up and down button arrows "▲" and "▼" . Press
"Select" to eject. The selected magazine will pop out 2 to 3 cm. See Figure 4.15.
The display will show a message telling that the magazine or magazines is/are ejected. If only one
magazine is ejected, the display indicates a button to push to eject the other magazine.

Figure 4.15. Magazine Eject.

With one hand, grip the handle on the outer side of the magazine bezel and hold the other hand under
the magazine. Pull the magazine carefully out and keep it in level with the loader. Use the hand under
the magazine to prevent the back of the magazine to fall down when it leaves the magazine bay. See
illustration in Figure 4.16 below.

Figure 4.16. Removing the magazine from the loader.

If the cartridge falls down, it may be damaged and data may be lost.
Caution
42 Chapter 4. Operation and Configuration.