Drive Info; Table 4.10. Storageloader Info Menu; Table 4.11. Drive Info Menu - Tandberg Data StorageLoader Installation And User Manual

Item Name
Loader Serial No.
Loader Slots State
Loader personality
Loader product ID
Loader Vendor ID
Loader FW part No
Loader FW revision
Cleaning Slot
Barcode Reader*
Audible Alarm
* Can only be enabled if a barcode scanner is installed.

Table 4.10. StorageLoader Info Menu.

4.5.2. Drive Info

An overview of the possible values for each Drive setting is listed in Table 4.11.
The different drive types used in the StorageLoader may not provide all the information contained in
Table 4.11 below. If an unavailable entry is selected, the string "Data Unavailable" is displayed.
Item name
Drive Product ID
Drive Vendor ID
Drive FW Revision
Drive Serial No.
Drive SCSI Id
Drive Temp
Drive SAS Id

Table 4.11. Drive Info Menu.

37 StorageLoader Installation and User Manual
Legal Values
Loader Serial number
View status for each loader slot
AT1280-1R VS160
AT3200-1R LTO2
StorageLoader
Current HW/FW Product Id
Current Inquiry Vendor Id
See the product label
StorageLoader FW id and revision
Defined cleaning slot, No set
Enabled, Disabled
Enabled, Disabled
Legal values
Drive Inquiry Product Id
Drive Inquiry Vendor Id
Drive Firmware Revision
Drive Serial Number
SCSI Id 0 to SCSI Id 15
Celsius
WWN
Default value
---
Not applicable
StorageLoader
StorageLoader
"TANDBERG"
See the product label
xx.yy
Not set
Enabled
Disabled
Default value
Drive dependent
Drive dependent
Drive dependent
Drive dependent
SCSI ID = 0
Drive dependent
Drive dependent