Drive Info; Remote Management Info; Statistics - Tandberg Data StorageLoader Installation And User Manual

Tandberg Data

4.5.2 Drive Info

The different drive types used in the StorageLoader may not provide all the
information listed below. If an unavailable entry is selected, the string "Data
Unavailable is displayed.
Item name
Drive Product ID
Drive Vendor ID
Drive FW Revision
Drive Serial No.
Drive SCSI Id

4.5.3 Remote Management Info

The Remote Management (RMM) setup is shown in the choices listed below. This
menu three is the place to find the currently allocated dynamic IP address, default
gateway and network mask when running in DHCP mode. The MAC address of the
Loader is also shown here.
Item name
IP address mode
Static IP address
Static netmask
Static default
gateway
Dynamic IP
address
Dynamic netmask
Dynamic default
gateway
MAC-address

4.5.4 Statistics

Item name
Fetch Statistics
Stow Statistics
Power On Time
Time since clean
StorageLoader Installation and User Manual
Legal values
Drive Inquiry Product Id
Drive Inquiry Vendor Id
Drive Firmware Revision
Drive Serial Number
SCSI Id 0 to SCSI Id 15
Legal values
Static mode, DHCP mode
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
Value is fixed
Description
When selected, the operator can scroll through the fetch
count and fetch retries for the drive and all magazine slots.
When selected, the operator can scroll through the stow count
and stow retries for the drive and all magazine slots.
Displays Power On Hours for the loader
If available from the drive, this entry displays number of
hours since the drive was last cleaned.
Operation and Configuration
Default value
Drive dependent
Drive dependent
Drive dependent
Drive dependent
SCSI ID = 5
Default value
DHCP mode
0.0.0.0
0.0.0.0
0.0.0.0
Not applicable
Not applicable
Not applicable
Value is fixed
33