Standard Seat: Replacing The Seat Frame - Otto Bock A200 Service Instructions Manual

fig. 33 Replacing the seat plate of the standard seat
1 Seat cushion
2 Seat plate

6.8.6 Standard Seat: Replacing the Seat frame

Preparation:
❒ Remove the side panels.
❒ Remove the footrest receiver (see Section 6.5.1 b).
❒ Remove the seat brackets (see Section 6.8.4).
❒ Remove the seat plate.
Tools:
❒ 2 x Allen wrench, 5 mm
Steps:
1. Loosen the screw connections between the seat frame and seat angles.
2. Remove the seat frame and replace if required.
Properly reassemble all components upon completion of the work.
fig. 34 Standard seat: replacing the seat frame
1
2
35