fig. 42
Attaching the Bowden cable
6.11.3 Retrofitting the Curb Climbing Assist
INfORMATION
The central curb climbing assist of the A200 cannot be used in combination with a single-panel footrest.
Preparation:
❒ Remove the footrests.
Tools:
❒ Allen wrench, 5 mm
Steps:
1. Attach the clamps to the frame tube but do not yet tighten the screws.
2. Feed the retainer bar with curb climbing assist through the clamps and centre. Make sure
that the curb climbing assist fits through between the two footrests.
3. Finally tighten the mounting screws and thereby fasten the clamps on the frame tube.
fig. 43
Mounting the curb climbing assist
42