Standard Seat: Replacing/Adjusting The Back Upholstery; Standard Seat: Replacing The Seat Frame - Otto Bock B400 Service Manual

fig. 37 Replacing the bearing plate

6.10.2 Standard Seat: Replacing/Adjusting the Back Upholstery

Steps:
1. Completely pull off the back upholstery and individually readjust, remove, or replace the hook
and loop straps in accordance with the user's requirements.
fig. 38 Standard seat: back upholstery

6.10.3 Standard Seat: Replacing the Seat Frame

NOTICE
Risk of cable damage. Pay attention to the cables fastened to the seat frame with cable ties. Carefully
cut the cable ties using side cutting pliers or a knife. Make sure not to damage the cables!
Preparation:
Remove the side panels.
❒
Tools:
Allen wrench, size  mm
❒
Ring wrench or open-end wrench, size 13 mm
❒
3