Replacing The Steering Caster - Otto Bock A200 Service Instructions Manual

fig. 22 Loosening the wheel flange screw
fig. 23 Putting puller in place

6.6.5 Replacing the Steering Caster

NOTICE
Risk of damage due to improper preparation of maintenance tasks. Use suitable objects such as
wooden blocks to secure the A200 power wheelchair against sliding or tipping. The drive wheels must
rotate freely.
INfORMATION
When installing the steering caster, ensure that the steering caster and drive wheel are aligned.
Tools:
❒ Two Allen wrenches, 4 mm
Steps:
1. Loosen the Allen head screw.
2. Remove the steering caster and replace if required.
Properly reassemble all components upon completion of the work.
28