Service work
fig. 35
Replacing the bearing plate
6.10.2 Standard seat: Replacing/adjusting the back upholstery
Steps:
1. Completely remove the back upholstery and readjust, remove or replace the hook-and-loop
straps according to individual user requirements.
fig. 36
Standard seat: back upholstery
6.10.3 Standard seat: Replacing the seat frame
NOTICE
Risk of cable damage. Take note of the cables attached to the seat frame with cable ties. Carefully
cut the cable ties with side-cutting pliers or a knife. Ensure that you do not damage the cables in the
process!
Preparation:
❒ Remove the side panels.
Tools:
❒ Allen wrench, size 5
❒ Ring or open-end spanner, size 13
40 | Ottobock
B400 Family