Base Frame; Replacing The Base Frame; Drive Unit; Replacing The Complete Drive Unit - Otto Bock A200 Service Instructions Manual

6.9 Base Frame

6.9.1 Replacing the Base frame

Tools:
❒ Water pump pliers
❒ Allen wrench, 5 mm
❒ Ring or open-end wrench, 13 mm
❒ Socket, 19 mm
Steps:
1. Unscrew the seat brackets from the base frame (see Section 6.8.3).
2. Remove the seat angles (see Section 6.8.7).
3. Remove the caster fork (see Section 6.6.6).
4. The base frame is exposed now and can be replaced if required.
Properly reassemble all components upon completion of the work.
fig. 38 Replacing the base frame
6.10 Drive Unit

6.10.1 Replacing the Complete Drive Unit

CAUTION
Risk of injury due to electric current. Before working on the drive unit, turn off the A200 power wheel-
chair.
The drive unit can be separated from the base frame and replaced if required without the use
of tools.
Make sure that the control panel cable runs inside the base frame after reassembly.
38