Operating Voltage And Frequency - Coemar CF 1200 Hard Edge Instruction Manual

5. Operating voltage and
frequency
coemar factory presets (barring specific requests), a voltage of 230v and 240v
selectable via the switch on the base of the CF 1200 Hard Edge.
power
240V
main setting
coemar:
208V
230V
240V
user:
208V
230V
240V
Remember to switch the selector (230 or 240V) to the position which best matches
the average voltage available at your particular venue.
If your required operating voltage is 208V, you may select this internally within the
unit by moving the cable numbered 21 (currently connected in the 240V position)
or the cable numbered 22 (currently connected in the 230V position), thereby no
longer availing yourself of either the 230V or 240V option.
22
21
Incorrect voltage selection will detrimentally affect the operation of
the projector. Under no circumstance should you move the cable num-
bered 26.
CF 1200 Hard Edge is fitted with an electronic ballast which automatically stabili-
ses the output voltage to the lamp with any input voltages within the range of 180 to
260V; there is therefore no need for any electrical modifications required for dealing
with voltages within this range.
power
main setting
26
21
220V
coemar:
208V
230V
240V
user:
208V
230V
240V
22 26