Coemar CF 1200 Hard Edge Instruction Manual page 23

3) Press the enter button to confirm your selection; the display will turn off, reap-
pearing when any button is next pressed.
function display
3) Press the + or -button to confirm your selection; the display will show oFF (for
display off).
tESt
This function allows for a test sequence to be carried out on the respective motors of
the unit in the absence of any DMX signal.
1) Press the menu button.
2) Press the + or - button until the display shows tESt (for test).
function display
3) Press the enter button to confirm your selection; the display will show t 01 (for
test number 1). Press the + or - buttons for subsequent tests from t 01 to t 12.
function display
In these tests the projector simulates the reception of a DMX 512 signal which is
increasing from 1 to 255 on the selected channel.
t 01= movement in the X-axis
t 02= fine movement in the X-axis
t 03= movement in the Y-axis
t 04= fine movement in the Y-axis
t 05= opening/closing of the dimmer
t 06= opening/closing of the blackout/strobe shutter
t 07= opening/closing of the iris diaphragm
t 08= movement of the zoom system
t 09= focus
t 10= selecting gobo 1
t 11= rotation gobo 1 360°
t 12= rotating gobo 1& and indexing of position
t 13= selecting gobo 2
t 14= selecting effect
t 15= rotating effect
t 16= rotating colour wheel 1
t 17= cyan
t 18= magenta
t 19= yellow
t 20= no function
4) Press the enter button to confirm your selection of test to be carried out.